WEBVTT

1
00:00:00.200 --> 00:00:05.352
A card reader belongs to one connection and one outlet, and a register lists the

2
00:00:05.352 --> 00:00:10.440
readers it may use. In this episode we pair a reader, and put it on a register.

3
00:00:11.393 --> 00:00:14.433
In the menu, under Admin, choose Payments.

4
00:00:19.883 --> 00:00:24.546
Scroll down to Card readers. Readers belong to an outlet, so first choose the

5
00:00:24.546 --> 00:00:26.363
outlet. We choose Main Street.

6
00:00:26.760 --> 00:00:32.250
One reader is here already, the spare reader, on the practice account. Each reader

7
00:00:32.250 --> 00:00:37.875
shows its state, the connection it belongs to, and the registers that use it. Nobody

8
00:00:37.875 --> 00:00:39.080
uses this one yet.

9
00:00:39.429 --> 00:00:40.869
Press Add a card reader.

10
00:00:41.220 --> 00:00:45.620
The wizard asks which connection the reader belongs to. We choose Training account.

11
00:00:46.710 --> 00:00:51.638
Then it offers three ways to add a reader. Pair a new reader, with the code it

12
00:00:51.638 --> 00:00:56.882
shows. Bring one in, when the provider already knows the reader. Or enter its id by

13
00:00:56.882 --> 00:01:00.230
hand. Which ones are offered depends on the provider.

14
00:01:00.580 --> 00:01:05.512
The steps come from the provider. Here they say there is no reader to switch on, and

15
00:01:05.512 --> 00:01:06.980
to type any pairing code.

16
00:01:07.329 --> 00:01:12.434
We type a code, and give the reader a name that tells your staff which one it is:

17
00:01:12.434 --> 00:01:13.569
Front till reader.

18
00:01:13.918 --> 00:01:18.680
Press Pair reader. The provider registers the reader, and the wizard waits until it

19
00:01:18.680 --> 00:01:19.598
says it is done.

20
00:01:19.948 --> 00:01:22.508
The reader is paired and ready. Press Done.

21
00:01:23.645 --> 00:01:28.525
Front till reader is now in the list, ready, and it belongs to the training account.

22
00:01:28.874 --> 00:01:34.954
Now we tell a register to use it. Under Registers, Register 2 has no reader.

23
00:01:35.305 --> 00:01:36.505
Press Choose readers.

24
00:01:36.855 --> 00:01:41.707
The dialog lists the readers this register may use. The first one is its primary

25
00:01:41.707 --> 00:01:46.619
reader. We add Front till reader with the plus button, and then the spare reader,

26
00:01:46.619 --> 00:01:48.135
which becomes its backup.

27
00:01:48.485 --> 00:01:54.485
Press Save. Register 2 now shows its primary reader, marked in use, and its backup.

28
00:01:54.834 --> 00:01:59.480
If the processor of the primary reader stops answering, a manager can switch the

29
00:01:59.480 --> 00:02:02.674
register to the backup. We see how in the next episode.

30
00:02:03.024 --> 00:02:07.356
In the next episode, the processor of a register goes down, and a manager switches

31
00:02:07.356 --> 00:02:08.624
it to the backup reader.